Athletic Greens
Results 1 to 5 of 5

Thread: Refletching Arrows

  1. #1
    Member buckeye96's Avatar
    Join Date
    Jul 2012
    Location
    Hudson, Ohio I hunt mostly in Jefferson County
    Posts
    47

    Refletching Arrows

    When I get out past 40 yards my groups start to open up. I shoot fixed blade broad heads, and was thinking about refletching my arrows. I used blazer vanes and was curious how much I should off set them. Would two degrees be suficient?

  2. #2
    Senior Member mrbb's Avatar
    Join Date
    Feb 2008
    Location
    northeast PA
    Posts
    5,911
    OK let me ask you, is it group size that is getting larger at 40 yrds over say 20-30 yrds?
    and have you paper tested at 40 yrds to see if there still flying well, before you go and re fletch
    many times group sizes open up farther out , just due to shooter error and not arrow issue's, or bow set up, but bow set up can cause issue's farther out of things are not set up corectly, just at closer ranges you don't notice them
    I known a few guys that used to video there shooting , and then used slow motion to help see where the cause is
    just something to think about before re fletching maybe!

    I ;m no pro by the way, just my 2 cents

  3. #3
    Member buckeye96's Avatar
    Join Date
    Jul 2012
    Location
    Hudson, Ohio I hunt mostly in Jefferson County
    Posts
    47
    I have not paper tested out that far. I always thought that paper tuning should be done at close range so the arrow does not have time to level itself. My bow is paper tuned and properly setup. I am sure some of my issues are user error and failing eye site, but I am looking for every advantage I can have. I was just curious if you thought putting a slight helical in my fletchings would help stabilize the arrow. Thanks for your help. I will have to try paper testing at 40. My groups at 20-30 are almost the same.

  4. #4
    Senior Member Big_Holla's Avatar
    Join Date
    Dec 2006
    Location
    S.E.Michigan to live & S.E. Ohio to dream
    Posts
    7,165
    Having done some reading on this before a lot of guys believe a 2-3 degree offset is very similar to a helical when a Blazer vane is being used. With that I ended up getting an actual helical clamp for my fletching jig because the offset never seemed to get the entire surface of the Blazer in contact with the shaft. Makes a world of difference when it comes to a fixed blade head. As far as paper tuning, I always thought that was an up close thing too.
    Opportunity is missed by most people because it is dressed in overalls and looks like work.
    - Thomas Edison


  5. #5
    Senior Member mrbb's Avatar
    Join Date
    Feb 2008
    Location
    northeast PA
    Posts
    5,911
    Yes paper tuning is mostly for up close, , BUT it will show if the arrows are twisting and cutting in all different ways, as if flying bad, and not just you aiming off target
    like if one arrow is kicking up and another down, and next to the side, that to me shows more of a flying issue, and not just havinga harder time holding a aiming spot group!
    you say your bow is in tune and paper tested, but when was the last time you checked?
    Only saying things can move and as distance gets farther, small things make bigger problems farther out then!
    a string can stretch, a rest or a nocking point can move a just enough to cause a headache

    Agian just tossing out idea's to check before making the new arrows up!, as if its a bow/sight issue, odds are it won't do much to cirrect and be starting all over!
    Good luck and let us know how it works out!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •