Results 1 to 3 of 3

Thread: Trail Camera Problems

Hybrid View

  1. #1
    Member
    Join Date
    Oct 2010
    Location
    Vermont
    Posts
    35

    Trail Camera Problems

    Looking to see if any one else has ever had issues with a Moultrie M-80 Trail Cam, mine just started acting up, I can set all the other function's on the camera except the time and date, when I power the camera off after making changes the camera will not hold the date and time, it automatically goes to 1/1/70, any input would help.

  2. #2
    Senior Member mrbb's Avatar
    Join Date
    Feb 2008
    Location
    northeast PA
    Posts
    5,925
    try taking camera and putting it in a BIG zip lock baggie, with a box of DRY WHITE rice, and close the bag up and leave it in there for about a week

    AFTER that try again
    IF NO GOOD still, try taking cover of the back, and using a Q tip, and some rubbing alcohol, wipe down all solder connections with it , and even MAYBE try spraying it with some GOOD plastic SAFE CRC electrical contact cleaner

    after that, try different brand of batteries and a different brand of SD card

    IF this is a NEW camera, send back to Moultrie, BEFORE DOING THE ABOVE
    but I am guessing its long past this point!!
    I have had many brands of camera act up and the above has fixed MOST of them

    dampness and moisture has a way of screwing with them??
    the rice helps remove that

    IF you get NO where and want to TRY ONE last ditch effort
    I have heard of a few folks that did this??

    pre heat an over to about 300 degree's
    get a cookie sheet, place a few layers of aluminum foil on it, place camera on it(battery/sd card OUT), place another two or three layers of Aluminum foil on TOP
    stick in oven for 6-7 minutes

    this suppose to re set all the connections on the solder without, WITHOUT melting the plastic, you will SMELL plastic, but its NOT supposed to kill camera
    TRY AS LAST RESORT MAYBE??
    and I have Never done this, just known a few folks that have!! and CLAIM IT WORKS!
    so, at your OWN risk here on this one LOL

    but a broken camera is just as bad as a melted one I guess LOL

  3. #3
    Member
    Join Date
    Oct 2010
    Location
    Vermont
    Posts
    35
    Hey mrbb thanks for the info, not sure i will try the oven method but will give the other a try,LOL, cant say i ever baked a camera before. thanks again.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •