Athletic Greens
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: what broadheads to use ?/

  1. #1

    what broadheads to use ?/

    jus wondering what everyone shoots and what grain??

  2. #2
    Senior Member MandRroofing's Avatar
    Join Date
    May 2009
    Location
    The Moon
    Posts
    346
    This is what I'm gonna try this year
    http://www.trophytaker.com/shuttle_t_lock.aspx

  3. #3
    Senior Member
    Join Date
    Sep 2005
    Posts
    377
    Spitfire 100gr.

  4. #4
    Senior Member buckbuster217's Avatar
    Join Date
    Jan 2009
    Posts
    1,031
    gonna be shootin the G5 T3s this year in a 100 grain
    no matter the language, everyone understands a punch in the mouth!

  5. #5
    Member BIGHUNTOH's Avatar
    Join Date
    Dec 2011
    Location
    Rootstown, Ohio
    Posts
    86
    grim reaper 150gr. bone collector carbon arrows

  6. #6
    Senior Member MQ1's Avatar
    Join Date
    Mar 2006
    Location
    Ashland Ohio
    Posts
    220
    I have been using G5 T3's 100 gr for 3 seasons now and i personally like them, and have had great results , they open on contact and 1.5" exit hole, another plus is they are 100% steel , I run them on 30.5" CX Terminator Selects 6075's
    "He is no fool who gives up what he can not keep,
                To gain what he can not lose."


  7. #7
    Senior Member offtheground's Avatar
    Join Date
    May 2010
    Location
    Clermont County
    Posts
    347
    I would not give you a wooden nickel for the G5 T3's, I used them for two hunts last year and threw them away. They will not hold up and you never know if the blue or red clippy thing is set right. You have to watch putting them in your quiver and taking them out any little push on the end or side of broadhead will mess up the clip and cause one or all three blades to flop around. I emailed them about my issue and go zero response. Save your money get something else.
    Patience and perseverance have a magical affect before which difficulties disappear and obstacles vanish."
    John Quincy Adams

  8. #8
    Senior Member MQ1's Avatar
    Join Date
    Mar 2006
    Location
    Ashland Ohio
    Posts
    220
    I know what you are talking about but it takes a little different quiver to use mechanicals , I went to a softloc with the two arrow webs and you just remove the first section of pad and the broadhead does not touch anthing.The single arrow web quivers are not really made for mechanicals due to what you explaned and foam build up on other types of mechanical heads. I like the dual web quivers now period. they hold the shafts solid and keeps down the noise when shooting with the quiver on.
    "He is no fool who gives up what he can not keep,
                To gain what he can not lose."


  9. #9
    Senior Member Big_Holla's Avatar
    Join Date
    Dec 2006
    Location
    S.E.Michigan to live & S.E. Ohio to dream
    Posts
    7,165
    I used the G5 T3's last year and really liked them and will definitely use them again this year. I understand what offtheground is saying though on if they are in the clips right or not. Not much in the literature to make sure they are set right but an email asking explained it well enough for me to gain complete confidence in using them.

    I have always been a tried and true fixed blade user and it really took me a lot to give them a try. The biggest problem I was having was getting consistent flight out of fixed blades. I would tune and tune and double check things, have people look at it at the bow shop, etc. and everything was always right however I would still get an arrow often enough that would fly out and not always the same arrow. Probably my form or something I was doing but it was enough to make me lose confidence in my equipment.
    Opportunity is missed by most people because it is dressed in overalls and looks like work.
    - Thomas Edison


  10. #10
    Junior Member
    Join Date
    Feb 2010
    Posts
    8
    Magnus 125 2 blade and STOS 160 2 blade. I shoot 160's with pine shafts that are just a little bit over spined
    for my bow.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •